How to Work Safely with - Products using the "Environment" Pictogram

The pictogram shows a tree with no leaves and a dead fish to represent harm to the environment.

NOTE: Classification and labelling of the environmental hazard group is not required for WHMIS 2015. However, suppliers may voluntarily choose to disclose these hazards on labels and Safety Data Sheets (SDSs).

If the product only has this pictogram, the main concern is its toxicity for aquatic life. Aquatic hazards may include short-term (acute) hazards which looks at short-term impacts on various aquatic life forms (such as fish, crustaceans, algae, and aquatic plants).

It also includes long-term (chronic) hazards which looks at long-term (chronic) impacts on aquatic life forms such as bioaccumulation (buildup of a product in an organism) and degradation (persistence, or how long it will remain in the environment).

• Bioaccumulation refers to the accumulation of a product in aquatic organisms. The bioaccumulation may or may not have a toxic effect on some organisms but it is a concern because when other organisms eat smaller organisms (e.g., accumulates in algae; little fish eat algae; big fish eats little fish), they accumulate more of the product. Eventually, the levels can have a negative impact.
• Degradation of the product refers to whether the product breaks down quickly or whether it is persistent and remains in the environment. Examples of the impacts include reduced spawning, genetic problems in offspring, and behavioural changes.

The Globally Harmonized System of Classification and Labelling of Chemicals (GHS) has assigned this pictogram to be used for Hazardous to the aquatic environment - short-term (acute) - category 1, and Hazardous to the aquatic environment - long-term (chronic) - categories 1 and 2. Note that Hazardous to the aquatic environment - short-term (acute) - categories 2 and 3, and Hazardous to the aquatic environment - long-term (chronic) - categories 3 and 4 have no pictogram assigned.

The Globally Harmonized System of Classification and Labelling of Chemicals (GHS) has assigned the following signal words and hazard statements:

In addition to the specific hazards identified by the environment pictogram, it is important to remember that the product may have other hazards. If the product using this pictogram is also potentially hazardous to humans (e.g., physical or health hazards), it would have the other hazard pictograms to warn about its other properties.

• Check the Safety Data Sheet (SDS) and label for information about the hazards and precautions.
• Use the smallest amount necessary.
• Avoid release to the environment.
• Immediately report leaks, spills or failures of the safety equipment (e.g. ventilation system).
• Recycle and reuse product, if possible.
• Properly dispose of the product and its container as hazardous waste – do not dump it down the drain, on the ground, or into any body of water.
• Prevent the product from contaminating ground water, surface waters, and the sewer system. Protect floor drains, and cover the opening to the sewer if able to do so and appropriate.
• Follow label warnings even if container appears to be empty. Dispose of (or recycle) empty containers through an approved waste management facility.
• Regularly inspect and maintain the equipment used for handling the product.
• Inform maintenance personnel of any special procedures and precautions before they begin to work on equipment.

• Store the product in a secure, dry, well-ventilated location. Storage area should have sills to prevent leaks from escaping into sewers.
• Use secondary containment for containers such as drip trays to contain leaks or spills. Empty trays regularly to avoid overflow.
• Monitor use of product. Unexpected increased use may indicate a leak.
• Isolate loading and unloading areas from surface water drainage systems. If not possible, protect drains using covers, sandbags, etc.

• Report leaks, spills to the people responsible for handling emergencies where you work.
• Have spill control procedures and equipment ready (e.g., absorbent spill control materials, personal protective equipment (PPE), etc.).
• Contain spill quickly by damming/diking with spill socks or suitable absorbent material (such as kitty litter, vermiculite, etc.). Do not leave spill site unattended.
• Be aware of applicable legislation in your jurisdiction concerning materials that are hazardous to the environment (e.g., permits).